Camcorders electronics

The XM2 maximizes the capability of the DV format by using a 3 CCD system assigning a separate CCD to each primary colour. A beam-splitting prism precisely separates the light passing through the lens into individual colour components, and each is sent to its own CCD. This process achieves outstanding detail with highly accurate colour reproduction suitable for the demands of the high-end production field - wide dynamic range, low colour noise, n

With 3x 1/3" 800k progressive scan CCDs and full manual control over all image settings, the XL2 represents the last word in flexible, broadcast quality miniDV.Features:3x 1/3" 800.000 pixel progressive scan CCDsTotal manual image controlPro Quality 16:9 and 4:3 recordingXL Interchangeable lens system20x optical zoom "L-Series" lens with zoom and focus presetsSuper range Optical Image StabilizerFluorite lens component and 2 Independent neutral de

Outstanding HDV1080i High Definition Camcorder for the serious videographer.1/3" 1.67 Megapixel 3CCD for amazing HDV1080i quality20x optical zoom lens with Optical Image Stabilizer (OIS)Instant AF and Focus AssistBetter control with Focus, Zoom and Iris ringsWidescreen viewfinder and 2.8" LCD screenManual zoom, focus, exposure, shutter speed, aperture, gain and custom presets.Cine gammaHot-shoe and XLR audio socketsDIGIC DV II for HDHDV1080iThe

Case holds the XM2 with a lens hood and a battery pack attached. There is also enough room to store additional battery packs, MiniDV cassettes and the WD-58H wide-converter, etc.

Standard replacement charger and power source for the MV600 range. It will charge one battery at a time. It connects directly to the camcorder's body and the battery can be charged while the CA-570 is attached.

This is the standard charger and power source for the XM2. It will charge one battery at a time.

The CB-910 powers the camera or charges the battery by plugging into a car's cigarette lighter socket.

The CB-920 powers the camera or charges the battery by plugging into a car's cigarette lighter socket.

The CH-910 holds two battery packs and can charge them one after the other. Once the batteries are charged, the CH-910, with batteries in place, can be clipped to your belt or attached to the MA-100 or MA-200 and then connected directly to the XL1S. This will give you twice the recording time of just one battery. It can be used with any combination of Canon Lithium-Ion batteries.

1450mAh Lithium-Ion Rechargeable Battery. Maximum continuous recording time 185 mins.